It is entirely possible to read bar codes directly off a computer
screen however there are a few technical issues and requirements that must
be considered.
First of all, the resolution of most computer
screens is too low to render a readable bar code if the standard bar code
dimensions are used. The width of the smallest bar or space in a normal
sized bar code is on the order of 13 mils wide yet the screen resolution
of most computer monitors is typically 72 dots per inch or 13.88 mils per
pixel. Since a computer screen draws graphics using fixed size pixels, it
cannot draw bars that have a width that is not an exact multiple of the
width of a single pixel. In order to display readable bar codes on a
computer screen, you must choose a bar width for your bar codes that is an
integer multiple of the width of a screen pixel. For example, if your
screen resolution is 72 DPI, then you should use bar codes that have a
narrow bar width of 13.88 mils, 27.77 mils or 41.66 mils, etc. This will
cause your bar codes to be larger than a normal bar code however they will
at least be readable. Also, if the bar code symbology that you want to use
supports a "Narrow to Wide Bar Width Ratio", then this value should be set
to an integer value of either two or three; with three being the preferred
value.
Secondly, there are several different types of bar code
readers on the market including wands, laser scanners, CCD readers and
camera based readers. The only types that can successfully read a bar code
off a computer screen are CCD readers and camera based readers. CCD
readers typically have difficulty reading bar codes off a normal glass
tube computer monitor however they can easily read bar codes off an Active
matrix or other flat panel display. The best type of reader to use when
reading bar codes from a normal computer monitor is a camera based reader.
The camera type readers actually take a picture of the bar code and use
digital image processing techniques to decode the bar code so that it is
much easier for it to read off a computer screen. The only drawback to
camera type readers is that they are extremely expensive with a typical
price tag of $1500 and up.
All other types of bar code readers
(pens and laser scanners) measure the intensity of reflected light and
therefore cannot be used to read from a monitor because the glass or
plastic in the monitor screen does not reflect light back to the
reader.
How
A Bar Code Reader Works
Bar
Code Basics
Bar
Code Symbology Descriptions
|
|
